HONDA FL5540K0 - Manual (Page 18)

SUB-FRAME and COUNTERWEIGHT
8. front of the sub-frame and slip it
into the channel of the lower cover. Insert
two mounting pins x from
inside sub-frame through frame lower
cover. Slip
a washer over each
mounting pin and insert the clip pins
through the holes.
NOTE: Mounting pins have a flat side that
must be pointing down.
9. Insert two mounting pins x
from inside the bottom bracket through the
sub-frame. Slip a washer over each pin
and retain with a clip pin as shown.
NOTE: Mounting pins have a flat side that
must be pointing down.
MOUNTING PIN
FLAT
SIDE DOWN
16