Heat & Glo Fireplace AUSTRALIAN GAS ASSOCIATION DAKOTA-AU - Manual (Page 16)

16 Heat & Glo Lifestyle Collection • Dakota-AU• 4036-914 Rev B • 06/07
Handle glass with care.
• Inspect the glass for cracks, chips or
scratches.
• Do NOT strike, slam or scratch glass.
• Do NOT operate fi replace with glass door
removed, cracked, broken or scratched.
• Replace glass door assembly as a
complete assembly.
WARNING
E. Glass Assembly
• The glass doors are included with and pre-installed in the
fi replace.
• To adjust doors (door lock screw must be removed, see
Section 4.A. and Figure 8.20), open them and loosen
screws on top and bottom pivot pins. Slide each door as
necessary and tighten screws.
• To adjust handle, loosen screws to move handles as
necessary and tighten screws.
Ashlip
Rock Pan
Figure 8.19 Placement of Lava Rocks
D. Placing Lava Rock
• After logs have been placed spread part of the lava
rock (included) between the rock pan and ashlip (see
Figure 8.19). Use of lava rock is optional.
F. Reinstall Door Lock
• When logs and lava rock have been installed, or if the
glass assembly has been adjusted, reinstall the door lock
by inserting the screw at the top of the door (see also,
Section 4.A.). Tighten screw.
Open Open
Locking Screw
Figure 8.20 Reinstall Door Lock