Hitachi VT-MX4410A - Manual (Page 15)

OPERATING CONTROLS AND FUNCTIONS
15
OPERATING CONTROLS AND FUNCTIONS
NOTE:
• We do not recommend the use of universal remote controls. Not all of the functions
may be controlled with a universal remote control.
If you decide to use a universal remote control with this unit, please be aware that the
code number given may not operate this unit. In this case, please call the manufacturer
of the universal remote control.
–VCR FRONT PANEL–
–REMOTE CONTROL –
1. Cassette Compartment
2. REW button-
Press to rewind the tape, or to view the picture rapidly in reverse during
the playback mode. (Rewind Search)
button - Press to cancel a setting of timer program. Press to correct digits when
setting program (For example: setting clock or timer program). Press to add or delete
channel numbers during channel preset. (only on the remote control)
3. STOP button-
Press to stop the tape motion.
EJECT button- Press to remove a tape from the VCR.
button - Press to enter digits when setting program (For example: setting clock or
timer program). Press to select the setting modes from the on screen menu. (only on
the remote control)
4
. PLAY button- Press to begin playback
button- Press to enter digits when setting program (For example: setting clock or
timer program). Press to select the setting modes from the on screen menu. (only on
the remote control)
5. F.FWD button-
Press to rapidly advance the tape, or view the picture rapidly in