Hitachi VT-MX4410A - Manual (Page 50)

RECORDING
50
To select the channel you want to view at the TV, follow the steps below.
NOTE: If you have a cable box or satellite box connected to this VCR, please refer
to "ANTENNA/CABLE CONNECTIONS" on pages 11 and 12 before proceeding to
the next step.
4 Select the TV mode
Press VCR/TV button on the remote control so that the VCR/TV indicator on the VCR
disappears.
5 Select the channel on the TV
Set the TV to the channel you want to watch.
TO MONITOR THE PROGRESS OF YOUR RECORDING
1) Press VCR/TV button on the remote control so that the VCR/TV indicator on the VCR
comes on.
2) Turn on the TV and set the TV channel to channel 3 or 4.
Now set the CH3/CH4 switch on the back of the
VCR to match the channel selected on the TV.
(Back of the VCR)