Hitachi VT-MX4410A - Manual (Page 41)

SPECIAL PLAYBACK
41
SPECIAL PLAYBACK
• Use the remote control for the following procedure
.
• Be sure to check that the POWER and the VCR/TV indicators are both on.
• Turn on the TV and set the TV to channel 3or 4. Now set the CH3/CH4 switch on the
back of the VCR to match the channel selected on the TV.
(Back of the VCR)
AUTO REPEAT PLAYBACK
The VCR has the auto repeat function that allows you to repeat a tape indefinitely
without touching the PLAY button.
Make sure to insert a prerecorded tape.
1 Select "VCR SET UP"
Press the MENU button until the VCR SET UP menu appears.
2 Select "AUTO REPEAT"
Confirm "AUTO REPEAT" is pointed to.
VCR SET UP
AUTO REPEAT
RENTAL
AUTO
RETURN
3 Begin Auto repeat playback
Press the F.FWD/ button so that [ON] will appear next to "AUTO REPEAT" on the TV
screen.
When in Stop mode, Repeat playback mode will start automatically.
If the on-screen menu still remains, press the RESET/EXIT button to exit the menu.
• Once you select the Auto Repeat mode, it stays in effect even after you turn off the
VCR.