Hitachi VT-MX4410A - Manual (Page 30)

SET UP FOR USE
30
• Use the remote control for this procedure.
• When the VCR in the Menu mode, the following buttons only work (PLAY/
,
F.FWD/ , REW/ , STOP/ , RESET/EXIT , POWER AND MENU).
• Be sure to check that the POWER and the VCR/TV indicators are both on.
• Turn on the TV and set the TV to channel 3 or 4. Now set the CH3/CH4 switch on the
back of the VCR to match the channel selected on the TV.
1 Select "SETTING CLOCK"
Press the MENU button. The SETTING CLOCK menu appears.
SETTING CLOCK
MONTH DAY YEAR
- - / - - - - - -
HOUR MINUTE AM/PM
- - : - - _ _
• The number buttons on the remote control do not work in this menu mode.
• When you press F.FWD/ button during steps [2] to [6], you may move forward to the
next step.
• Press the REW/ button to go back one step from the current step during steps [3] to
[7].
2 Select the month
Press the PLAY/ or STOP/ button repeatedly until the desired month appears.
(Example: March 03)
Then, the press F.FWD/ button.
SETTING CLOCK
MONTH DAY YEAR
03 / - - - - - -
HOUR MINUTE AM/PM
- - : - - - -