Hitachi VT-MX4410A - Manual (Page 59)

TIMER RECORDING
59
REC SPEED SP
SP
SLP
11 Finish setting the program
Press the F.FWD/ button. Program 1 is now completed.
• To set another program, repeat steps [2] to [11].
• Press the RESET/EXIT button
to return to original mode.
12 Set the timer
Press the POWER button to turn off. The Timer indicator on the VCR comes on.
• Please see "HINTS FOR TIMER
RECORDING" for more information.
HINTS FOR TIMER RECORDING
• If there is a power failure or the VCR is unplugged for more than 30 seconds, the clock
setting and all timer settings will be lost.
• If the tape runs out before the end time, the VCR will switch to the Stop mode
immediately, eject the tape and the VCR power will be turned off. The TIMER indicator
will flash.
• If a tape is not in the VCR or does not have the erase-protection tab, the TIMER
indicator flashed and timer recording cannot be performed. Please insert a recordable
tape.
• The TV that is connected to your VCR may be turned ON or OFF when the VCR is in
the timer-record mode.