Hitachi VT-MX4410A - Manual (Page 45)

SPECIAL PLAYBACK
45
Press REW or F.FWD button. The VCR begins rewinding or fast forwarding to the
beginning of desired program.
Note:
Every time an index signal is skipped, the number in the program indicator
decreases by one.
5 After Index Search
When the preset program is reached, the VCR will start playback automatically.
• A video cassette must be inserted in the VCR for this function to work.
• The number of Index Searches can be set up to 20.
• This function will not operate in the recording mode.
• When you want to cancel the Index Search while in progress, press the STOP button.
QUICK-FIND
This function enables you to search and confirm the contents of the recorded
program(s) using the index mark.
The VCR begins fast forwarding by selecting this function. When the VCR find the
beginning of the program(=the index mark), the VCR begins playback video tape at high
speed for 30 seconds. Then, return to fast forwarding again to the beginning of next
program. The VCR repeats these operation to the tape end.
Concerning the index mark, please see "INDEX SEARCH" section.
• Tape must be fully rewound.
• You can begin the Quick-Find by pressing the QUICK-FIND button on the remote
control.
You can also begin the Quick-Find by the following procedure.
1 Select "SEARCH SELECT"
Press the MENU button until the SEARCH SELECT menu appears.
2 Select "QUICK-FIND"
Confirm "QUICK-FIND" is pointed to, then press the F.FWD/ button. The VCR begins
the Quick-Find.
SEARCH SELECT
QUICK-FIND
INDEX
SEARCH