Hitachi VT-MX4410A - Manual (Page 18)

PREPARATION FOR USE
18
PREPARATION FOR USE
ANTENNA/CABLE CONNECTIONS
For some of the most common types of connections, see the following drawings. Use
only one connection. For any further complex connections, please contact your local
dealer or other qualified persons. (You may need additional accessories which are not
supplied).
1 Disconnect the antenna or cable from your TV.
2 Connect the antenna or cable to the ANT.IN (Top jack) of your VCR.
3 Connect one end of the coaxial cable (supplied) to the ANT.OUT (Bottom jack) of your
VCR.
4 Connect the other end of the coaxial cable (supplied) to the UHF/VHF antenna jacks
of your TV.
Fig. 1: Indoor Antenna
You can record one channel while viewing another. The same goes for Automatic Timer
Recording and IRT. For details, please refer to "Recording" on page 22.
Note
: The connection of an indoor antenna with a VCR may not always give acceptable
TV reception.
Fig. 2: VHF/UHF Combination Antenna or Cable from the Cable Company