Auto continue, Clearable warnings (available for, The hp color laserjet 3700 series printer) – HP 3500 User Manual
Page 55
9. Press
to set the personality.
10. Press
M
ENU
.
Clearable warnings (available for the hp color LaserJet 3700
series printer)
You can determine the display time of control panel clearable warnings with this option by
selecting ON or JOB. The default value is JOB.
●
ON displays clearable warnings until you press .
●
JOB displays clearable warnings until the end of the job for which it was generated.
To set the clearable warnings
1. Press
M
ENU
to enter the MENUS.
2. Press
to highlight Configure Device.
3. Press
to select Configure Device.
4. Press
to highlight SYSTEM SETUP.
5. Press
to select SYSTEM SETUP.
6. Press
to highlight CLEARABLE WARNINGS.
7. Press
to select CLEARABLE WARNINGS.
8. Press
or
to select the appropriate setting.
9. Press
to set the selection.
10. Press
M
ENU
.
Auto continue
You can determine printer behavior when the system generates an Auto Continuable error.
ON is the default setting.
●
ON displays an error message for ten seconds before automatically continuing to print.
●
OFF pauses the print job any time the printer displays an error message and until you
press .
To set the auto continue
1. Press
M
ENU
to enter the MENUS.
2. Press
to highlight Configure Device.
3. Press
to select Configure Device.
4. Press
to highlight SYSTEM SETUP.
5. Press
to select SYSTEM SETUP.
6. Press
to highlight AUTO CONTINUE.
7. Press
to select AUTO CONTINUE.
8. Press
or
to select the appropriate setting.
ENWW
Changing printer control panel configuration settings
43