HP 17 User Manual
Page 70
Advertising
Remove the audio/USB board:
1.
Disconnect the following the following cables from the audio/USB board:
(1) Audio/USB ZIF cable (included in the audio/USB board spare part kit)
(2) Audio/USB cable (included in the audio/USB board spare part kit)
(3) Front speaker cable
2.
Remove the Phillips PM2.5×4.5 screw (1) that secures the audio/USB board to the
base enclosure.
3.
Remove the audio/USB board (2).
62
Chapter 4 Removal and replacement procedures
ENWW
Advertising