HP 17 - Manual (Page 88)

4. Release the WLAN module antenna cables (2) from the clips and routing channel built into the
base enclosure.
5. Turn the computer display side up, with the front toward you.
6. Open the computer as far as it will open.
7. Release the WLAN module antenna cables from the openings (1) built into the base enclosure,
and then release the left-hinge cables from the clip (2) built into the base enclosure.
8. Disconnect the display panel cable (3) and display function cable from the system board.
80 Chapter 4 Removal and replacement procedures ENWW