HP 17 User Manual
Page 86
Advertising
d.
System board (see
)
e.
Fan/heat sink assembly on page 74
Remove the processor:
1.
Turn the processor locking screw (1) one-half turn counterclockwise, until you hear a click.
2.
Lift the processor (2) straight up, and remove it.
NOTE:
The gold triangle (3) on the processor must be aligned with the triangle icon (4)
embossed on the processor socket when you install the processor.
Reverse this procedure to install the processor.
78
Chapter 4 Removal and replacement procedures
ENWW
Advertising