HP 17 - Manual (Page 79)

●
Power connector cable (see Power connector cable on page 73 )
●
Fan/heat sink assembly (see Fan/heat sink assembly on page 74 )
●
Processor (see Processor on page 77 )
Remove the system board:
1. Disconnect the following cables from the system board:
(1) Display panel cable and display function cable
(2) Power button board cable
(3) Audio/USB board ZIF cable and audio/USB board cable
(4) TouchPad LED board cable
(5) Card Reader board cable
2. Release the power connector (1) from the clip built into the base enclosure.
ENWW Component replacement procedures 71