Recording audio, Playing recorded video – Honeywell HRSD4 User Manual
Page 110
Operation
110
Recording Audio
If you set the DVR to record audio, it records audio when video is recording.
Note
The DVR does NOT record audio when the recording speed is
set to less than 15 ips. If you are monitoring the DVR remotely
using the RASplus program, audio recording may be affected by
network bandwidth conditions. Any activity in addition to
recording, such as monitoring or playback, may drop the
recording speed below 15 ips.
Note
Ensure that you comply with all local and federal laws and
regulations when recording audio.
Playing Recorded Video
You can use the arrow buttons to view recorded video. After searching for video, the
DVR begins playback with the most recent image. When playing recorded video after
initial playback, the DVR starts playing video from the last recalled image.
If there was any text input during recording, then the DVR displays the text-in data over
the image during playback.
Note
The text-in displays only in the full screen.
Note
Ensure that Text-In is turned On during OSD setup if you want to
display the text-in information on the playback image.