Honeywell HRSD4 - Manual (Page 99)

Configuration
Document 800-00919 Rev F 99
02/08
Note You cannot end the archiving process during CD burning.
Refer to the RASplus User's Manual for instructions on how to review the images you
have backed up.
Note During clip copy, you cannot change the system date and time,
shut the system down, switch to the Quick Setup mode, clear all
data, or change the system setup from a remote site.
Note The recording speed decreases to 1 ips per camera during CD
burning or while the DVR is preparing clip copy data on a hard
disk drive.
Caution Do NOT use poor quality CD-R or CD-RW discs or ones that have
been scratched or damaged in any way.
Caution Do NOT disconnect the USB cable or the power from the external
drive while backing up video. If the external drive is shut down or
the USB cable is disconnected while backing up, THE DVR
SYSTEM MAY NOT WORK NORMALLY OR THE EXTERNAL
DRIVE COULD BE DAMAGED, and you will get an error message
the next time you try to back up.
If the external drive is shut down or the USB cable is disconnected
while backing up, you need to power down the DVR and restart it
to delete/bypass the error message.
If the file system of the USB-IDE hard disk drive has been
corrupted, this error message cannot be dismissed. Even after
restarting, the DVR may automatically restart while preparing a
backup. You must recover the file system using the recovery
program, or you must reformat the hard disk drive.