Honeywell HRSD4 - Manual (Page 53)

Configuration
Document 800-00919 Rev F 53
02/08
Figure 3-22 Motion Detector Setup Screen
Turning Motion Detection On or Off
To turn motion detection On or Off for each camera, highlight the On/Off field next to
the camera, and press
. When you turn motion detection On, the Sensitivity and
Zone fields become active.
Selecting the Sensitivity Level of the Motion Detector
To adjust the sensitivity of the DVR to motion, highlight the field under Sensitivity. There
are five settings, with 1 being the least sensitive and 5 being the most sensitive.
Defining the Motion Detection Area
You can define the area of the image where you want to detect motion. For example,
you can choose a doorway.
1. Highlight the icon under the Zone heading and press . The Motion Detection
Zone screen appears.
Figure 3-23 Motion Detection Zone Screen