Honeywell HRSD4 - Manual (Page 58)

Configuration
58
Setting Up the Alarm Output
The Alarm Out setup screen allows you to establish a schedule for each alarm output
from the DVR.
Highlight Alarm Out in the Main menu and press . The Alarm Out setup screen
appears.
Figure 3-28 Alarm Out Setup Screen
Titling an Alarm Output
To give each alarm output its own title, highlight the field under the Title heading and
press the
button. A virtual keyboard appears with which you can enter the title.
Transaction
Timeout Highlight the field beside Transaction Timeout, and set the
length of time to wait for the new text string. The DVR
recognizes the end of a transaction if there is no text string
input during the timeout dwell time after the last text string
input. You can adjust the timeout dwell from 1 to 300
seconds.
Display Dwell Highlight the field beside Display Dwell, and set the length of
time you would like to display text-in data. You can adjust the
display dwell time from 1 to 300 seconds.
Case Sensitive Highlight the Case Sensitive field and press to toggle
between On and Off. Refer to the device manufacturer's
documentation to determine if the text strings are Case
Sensitive.
If the device distinguishes between upper and lower case
letters, ensure that the Case Sensitive field is turned On.
Table 3-7 Text-In Setup Screen Options
Option Function