Hand Held Products 5700 - Manual (Page 21)

1–13 SCANTEAM 5700 User’s Guide
Show Software Revision
Factory Default Settings
Reset Factory Settings
Status Check
Program Carriage Return Suffix
Quick Suffix Selections
Clear Bar Code Suffix
Scanning the Factory Default Settings bar code resets the scanner to the
original factory settings, clearing any programming changes you may have
made.
If your application requires it, scan the Program Carriage Return Suffix bar
code to program a carriage return (CR) suffix for all enabled bar code
symbologies. Scanning this bar code clears all previously programmed
prefixes and suffixes.
Scan the Clear Bar Code Suffix bar code to disable (or clear) all previously
programmed prefixes and suffixes (e.g., the carriage return suffix).
Scan the Show Software Revision bar code to transmit the software revision
level to the host terminal. The software revision will be printed out as
“WA34310XXX.” (The “X’s” will vary according to the firmware ID.)