Document Outline

• Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
• Notice
  • ENTERASYS NETWORKS, INC. FIRMWARE LICENSE AGREEMENT
• Contents
• Figures
• Tables
• About This Guide
  • Using This Guide
  • Structure of This Guide
  • Related Documents
  • Document Conventions
  • Typographical and Keystroke Conventions
• Introduction
  • 1.1 Overview
  • 1.2 Getting Help
• Management Terminal and Modem Setup Requirements
  • 2.1 Connecting to a Console Port for Local Management
    • 2.1.1 What Is Needed
    • 2.1.2 Connecting to an IBM or Compatible Device
    • 2.1.3 Connecting to a VT Series Terminal
    • 2.1.4 Connecting to a Modem
      • 2.1.4.1 Configuring the Modem to Not Send Login Requests
    • 2.1.5 Adapter Wiring and Signal Assignments
• Startup and General Configuration
  • 3.1 Startup and General Configuration Summary
    • 3.1.1 Factory Default Settings
    • 3.1.2 Command Defaults Descriptions
    • 3.1.3 CLI Command Modes
    • 3.1.4 Using WebView
    • 3.1.5 Process Overview: CLI Startup and General Configuration
    • 3.1.6 Starting and Navigating the Command Line Interface (CLI)
      • 3.1.6.1 Using a Console Port Connection
      • 3.1.6.2 Logging in with a Default User Account
      • 3.1.6.3 Logging in With an Administratively Configured User Account
      • 3.1.6.4 Using a Telnet Connection
    • 3.1.7 Getting Help with CLI Syntax
    • 3.1.8 Displaying Scrolling Screens
    • 3.1.9 Basic Line Editing Commands
  • 3.2 General Configuration Command Set
    • 3.2.1 Setting User Accounts and Passwords
      • 3.2.1.1 show system login
      • 3.2.1.2 set system login
      • 3.2.1.3 clear system login
      • 3.2.1.4 set password
      • 3.2.1.5 set system password length
      • 3.2.1.6 set system password aging
      • 3.2.1.7 set system password history
      • 3.2.1.8 set system lockout attempts
      • 3.2.1.9 set system lockout
    • 3.2.2 Setting Basic Device Properties
      • 3.2.2.1 show system resources
      • 3.2.2.2 show system
      • 3.2.2.3 show time
      • 3.2.2.4 set time
      • 3.2.2.5 set prompt
      • 3.2.2.6 show banner motd
      • 3.2.2.7 set banner motd
      • 3.2.2.8 clear banner motd
      • 3.2.2.9 show version
      • 3.2.2.10 set system name
      • 3.2.2.11 set system location
      • 3.2.2.12 set system contact
      • 3.2.2.13 show terminal
      • 3.2.2.14 set terminal
      • 3.2.2.15 set system timeout
      • 3.2.2.16 show summertime
      • 3.2.2.17 set summertime
      • 3.2.2.18 set summertime date
      • 3.2.2.19 set summertime recurring
      • 3.2.2.20 clear summertime
      • 3.2.2.21 set console baud
      • 3.2.2.22 show ip address
      • 3.2.2.23 set ip address
    • 3.2.3 Downloading a Firmware Image
      • 3.2.3.1 Downloading via the Serial Port
      • 3.2.3.2 Downloading via TFTP
    • 3.2.4 Configuring Telnet
      • 3.2.4.1 show telnet
      • 3.2.4.2 set telnet
    • 3.2.5 Managing Switch Configuration Files
      • 3.2.5.1 dir
      • 3.2.5.2 show config
      • 3.2.5.3 configure
      • 3.2.5.4 summaryconfig
      • 3.2.5.5 copy
      • 3.2.5.6 set system bootconfig
      • 3.2.5.7 delete
    • 3.2.6 Configuring Enterasys and Cisco Discovery Protocols
      • 3.2.6.1 show cdp
      • 3.2.6.2 set cdp
      • 3.2.6.3 set cdp interval
      • 3.2.6.4 show ciscodp
      • 3.2.6.5 set ciscodp status
      • 3.2.6.6 set ciscodp timer
      • 3.2.6.7 set ciscodp holdtime
      • 3.2.6.8 set ciscodp populatecdp
      • 3.2.6.9 show port ciscodp info
      • 3.2.6.10 show port ciscodp neighborinfo
      • 3.2.6.11 set port ciscodp status
      • 3.2.6.12 set port ciscodp trust-ext
      • 3.2.6.13 set port ciscodp cos-ext
      • 3.2.6.14 set port ciscodp vvid
    • 3.2.7 Pausing, Clearing and Closing the CLI
      • 3.2.7.1 wait
      • 3.2.7.2 cls (clear screen)
      • 3.2.7.3 exit
    • 3.2.8 Resetting the Device
      • 3.2.8.1 show reset
      • 3.2.8.2 reset
      • 3.2.8.3 reset at
      • 3.2.8.4 reset in
      • 3.2.8.5 clear config
  • 3.3 Preparing the Device for Router Mode
    • 3.3.1 Pre-Routing Configuration Tasks
    • 3.3.2 Configuring VLANs for IP Routing
    • 3.3.3 Enabling Router Configuration Modes
• Port Configuration
  • 4.1 Port Configuration Summary
    • 4.1.1 Port Assignment Scheme
    • 4.1.2 Port String Syntax Used in the CLI
  • 4.2 Process Overview: Port Configuration
  • 4.3 Port Configuration Command Set
    • 4.3.1 Reviewing Port Status
      • 4.3.1.1 show port status
      • 4.3.1.2 show port counters
      • 4.3.1.3 clear port counters
    • 4.3.2 Disabling / Enabling Ports
      • 4.3.2.1 set port disable
      • 4.3.2.2 set port enable
    • 4.3.3 Setting Speed and Duplex Mode
      • 4.3.3.1 show port speed
      • 4.3.3.2 set port speed
      • 4.3.3.3 show port duplex
      • 4.3.3.4 set port duplex
    • 4.3.4 Enabling / Disabling Jumbo Frame Support
      • 4.3.4.1 show port jumbo
      • 4.3.4.2 set port jumbo
    • 4.3.5 Setting Port Auto-Negotiation and Advertised Ability
      • 4.3.5.1 show port negotiation
      • 4.3.5.2 set port negotiation
      • 4.3.5.3 show port advertised ability
      • 4.3.5.4 set port advertised ability
    • 4.3.6 Setting Flow Control and Thesholds
      • 4.3.6.1 show port flowcontrol
      • 4.3.6.2 set port flowcontrol
      • 4.3.6.3 show port buffer threshold
      • 4.3.6.4 set port buffer threshold
      • 4.3.6.5 show flow agetime
      • 4.3.6.6 set flow agetime
      • 4.3.6.7 clear flow agetime
      • 4.3.6.8 show port holbp
      • 4.3.6.9 set port holbp
    • 4.3.7 Setting Port Traps
      • 4.3.7.1 show port trap
      • 4.3.7.2 set port trap
    • 4.3.8 Overview: Port Mirroring
    • 4.3.9 Setting Port Mirroring
      • 4.3.9.1 show port mirroring
      • 4.3.9.2 set port mirroring
      • 4.3.9.3 clear port mirroring
    • 4.3.10 Configuring Link Aggregation
      • 4.3.10.1 Matrix E1 Trunk and LAG Usage Considerations
      • 4.3.10.2 Port Grouping Considerations
    • 4.3.11 Configuring Static Port Trunking
      • 4.3.11.1 show trunk
      • 4.3.11.2 set trunkmode
      • 4.3.11.3 set trunk
      • 4.3.11.4 clear trunk
      • 4.3.11.5 set trunk port
      • 4.3.11.6 clear trunk port
      • 4.3.11.7 set trunk algorithm
    • 4.3.12 Link Aggregation Control Protocol (LACP)
      • 4.3.12.1 LACP Operation
      • 4.3.12.2 LACP Terminology
      • 4.3.12.3 Matrix E1 LAG Usage Considerations
    • 4.3.13 Configuring Link Aggregation
      • 4.3.13.1 set lacp
      • 4.3.13.2 set lacp static
      • 4.3.13.3 clear lacp static
      • 4.3.13.4 show port lacp
      • 4.3.13.5 set port lacp
    • 4.3.14 Configuring Port Broadcast Suppression
      • 4.3.14.1 show port broadcast
      • 4.3.14.2 set port broadcast
    • 4.3.15 Configuring Unknown Destination Address Suppression
      • 4.3.15.1 show port unknowndestsuppress
      • 4.3.15.2 set port unknowndestsuppress
      • 4.3.15.3 clear port unknowndestsuppress
• SNMP Configuration
  • 5.1 SNMP Configuration Summary
    • 5.1.1 SNMPv1 and SNMPv2
    • 5.1.2 SNMPv3
    • 5.1.3 About SNMP Security Models and Levels
    • 5.1.4 Process Overview: SNMP Configuration
  • 5.2 SNMP Command Set
    • 5.2.1 Disabling / Enabling and Reviewing SNMP Statistics
      • 5.2.1.1 show snmp
      • 5.2.1.2 set snmp
      • 5.2.1.3 show snmp engineid
      • 5.2.1.4 show snmp counters
    • 5.2.2 Configuring SNMP Users, Groups and Communities
      • 5.2.2.1 show snmp user
      • 5.2.2.2 set snmp user
      • 5.2.2.3 clear snmp user
      • 5.2.2.4 show snmp group
      • 5.2.2.5 set snmp group
      • 5.2.2.6 clear snmp group
      • 5.2.2.7 show community
      • 5.2.2.8 set community
      • 5.2.2.9 clear community
      • 5.2.2.10 show snmp community
      • 5.2.2.11 set snmp community
      • 5.2.2.12 clear snmp community
    • 5.2.3 Configuring SNMP Access Rights
      • 5.2.3.1 show snmp access
      • 5.2.3.2 set snmp access
      • 5.2.3.3 clear snmp access
      • 5.2.3.4 show snmp authenticationtrap
      • 5.2.3.5 set snmp authentication trap
    • 5.2.4 Configuring SNMP MIB Views
      • 5.2.4.1 show snmp view
      • 5.2.4.2 set snmp view
      • 5.2.4.3 clear snmp view
    • 5.2.5 Configuring SNMP Target Parameters
      • 5.2.5.1 show snmp targetparams
      • 5.2.5.2 set snmp targetparams
      • 5.2.5.3 clear snmp targetparams
    • 5.2.6 Configuring SNMP Target Addresses
      • 5.2.6.1 show snmp targetaddr
      • 5.2.6.2 set snmp targetaddr
      • 5.2.6.3 clear snmp targetaddr
    • 5.2.7 Configuring SNMP Notification Parameters
      • 5.2.7.1 show trap
      • 5.2.7.2 set trap
      • 5.2.7.3 clear trap
      • 5.2.7.4 show newaddrtrap
      • 5.2.7.5 set newaddrtrap
      • 5.2.7.6 show snmp notify
      • 5.2.7.7 set snmp notify
      • 5.2.7.8 clear snmp notify
      • 5.2.7.9 show snmp notifyfilter
      • 5.2.7.10 set snmp notifyfilter
      • 5.2.7.11 clear snmp notifyfilter
      • 5.2.7.12 show snmp notifyprofile
      • 5.2.7.13 set snmp notifyprofile
      • 5.2.7.14 clear snmp notifyprofile
    • 5.2.8 Basic SNMP Trap Configuration
• Spanning Tree Configuration
  • 6.1 Spanning Tree Configuration Summary
    • 6.1.1 Overview: Single, Rapid and Multiple Spanning Tree Protocols
    • 6.1.2 Spanning Tree Features
    • 6.1.3 Process Overview: Spanning Tree Configuration
  • 6.2 Spanning Tree Configuration Command Set
    • 6.2.1 Reviewing and Setting Spanning Tree Bridge Parameters
      • 6.2.1.1 show spantree stats
      • 6.2.1.2 set spantree
      • 6.2.1.3 show spantree version
      • 6.2.1.4 set spantree version
      • 6.2.1.5 clear spantree version
      • 6.2.1.6 show spantree mstilist
      • 6.2.1.7 set spantree msti
      • 6.2.1.8 clear spantree msti
      • 6.2.1.9 show spantree mstmap
      • 6.2.1.10 set spantree mstmap
      • 6.2.1.11 clear spantree mstmap
      • 6.2.1.12 show spantree vlanlist
      • 6.2.1.13 show spantree mstcfgid
      • 6.2.1.14 set spantree mstcfgid
      • 6.2.1.15 clear spantree mstcfgid
      • 6.2.1.16 set spantree priority
      • 6.2.1.17 clear spantree priority
      • 6.2.1.18 show spantree bridgehellomode
      • 6.2.1.19 set spantree bridgehellomode
      • 6.2.1.20 clear spantree bridgehellomode
      • 6.2.1.21 set spantree hello
      • 6.2.1.22 clear spantree hello
      • 6.2.1.23 set spantree maxage
      • 6.2.1.24 clear spantree maxage
      • 6.2.1.25 set spantree fwddelay
      • 6.2.1.26 clear spantree fwddelay
      • 6.2.1.27 show spantree autoedge
      • 6.2.1.28 set spantree autoedge
      • 6.2.1.29 clear spantree autoedge
      • 6.2.1.30 show spantree legacypathcost
      • 6.2.1.31 set spantree legacypathcost
      • 6.2.1.32 clear spantree legacypathcost
      • 6.2.1.33 show spantree tctrapsuppress
      • 6.2.1.34 set spantree tctrapsuppress
      • 6.2.1.35 clear spantree tctrapsuppress
      • 6.2.1.36 show spantree txholdcount
      • 6.2.1.37 set spantree txholdcount
      • 6.2.1.38 clear spantree txholdcount
      • 6.2.1.39 set spantree maxhops
      • 6.2.1.40 clear spantree maxhops
    • 6.2.2 Reviewing and Setting Spanning Tree Port Parameters
      • 6.2.2.1 show spantree portadmin
      • 6.2.2.2 set spantree portadmin
      • 6.2.2.3 clear spantree portadmin
      • 6.2.2.4 show spantree blocked ports
      • 6.2.2.5 show spantree portpri
      • 6.2.2.6 set spantree portpri
      • 6.2.2.7 clear spantree portpri
      • 6.2.2.8 show spantree portcost
      • 6.2.2.9 set spantree portcost
      • 6.2.2.10 clear spantree portcost
      • 6.2.2.11 show spantree adminedge
      • 6.2.2.12 set spantree adminedge
      • 6.2.2.13 clear spantree adminedge
      • 6.2.2.14 show spantree spanguard
      • 6.2.2.15 set spantree spanguard
      • 6.2.2.16 clear spantree spanguard
      • 6.2.2.17 show spantree spanguardtimeout
      • 6.2.2.18 set spantree spanguardtimeout
      • 6.2.2.19 clear spantree spanguardtimeout
      • 6.2.2.20 show spantree spanguardlock
      • 6.2.2.21 clear spantree spanguardlock
      • 6.2.2.22 show spantree spanguardtrapenable
      • 6.2.2.23 set spantree spanguardtrapenable
      • 6.2.2.24 clear spantree spanguardtrapenable
      • 6.2.2.25 show spantree adminpoint
      • 6.2.2.26 set spantree adminpoint
      • 6.2.2.27 clear spantree adminpoint
• 802.1Q VLAN Configuration
  • 7.1 VLAN Configuration Summary
    • 7.1.1 Port Assignment Scheme
    • 7.1.2 Port String Syntax Used in the CLI
  • 7.2 Process Overview: 802.1Q VLAN Configuration
  • 7.3 VLAN Configuration Command Set
    • 7.3.1 Reviewing Existing VLANs
      • 7.3.1.1 show vlan
      • 7.3.1.2 show vlan static
      • 7.3.1.3 show vlan portinfo
    • 7.3.2 Creating and Naming Static VLANs
      • 7.3.2.1 set vlan
      • 7.3.2.2 set vlan name
      • 7.3.2.3 clear vlan
      • 7.3.2.4 clear vlan name
    • 7.3.3 Assigning Port VLAN IDs (PVIDs) and Ingress Filtering
      • 7.3.3.1 show port vlan
      • 7.3.3.2 set port vlan
      • 7.3.3.3 clear port vlan
      • 7.3.3.4 show port ingress filter
      • 7.3.3.5 set port ingress filter
    • 7.3.4 Configuring the VLAN Egress List
      • 7.3.4.1 set vlan forbidden
      • 7.3.4.2 show port egress
      • 7.3.4.3 set vlan egress
      • 7.3.4.4 clear vlan egress
      • 7.3.4.5 show vlan dynamic egress
      • 7.3.4.6 set vlan dynamicegress
    • 7.3.5 Assigning VLANs According to Classification Rules
      • 7.3.5.1 show vlan classification
      • 7.3.5.2 set vlan classification
      • 7.3.5.3 Valid Values for VLAN Classification and Frame Filtering
      • 7.3.5.4 Classification Precedence Rules
      • 7.3.5.5 clear vlan classification
      • 7.3.5.6 set vlan classification ingress
      • 7.3.5.7 clear vlan classification ingress
    • 7.3.6 Setting the Host VLAN
      • 7.3.6.1 show host vlan
      • 7.3.6.2 set port vlan host
      • 7.3.6.3 clear host vlan
    • 7.3.7 Creating a Secure Management VLAN
    • 7.3.8 Enabling/Disabling GVRP (GARP VLAN Registration Protocol)
      • 7.3.8.1 show gvrp
      • 7.3.8.2 show garp timer
      • 7.3.8.3 set gvrp
      • 7.3.8.4 set garp timer
• Policy Classification Configuration
  • 8.1 Policy Classification Configuration Summary
  • 8.2 Process Overview: Policy Classification Configuration
  • 8.3 Policy Classification Configuration Command Set
    • 8.3.1 Configuring Policy Profiles
      • 8.3.1.1 show policy profile
      • 8.3.1.2 set policy profile
      • 8.3.1.3 clear policy profile
      • 8.3.1.4 show policy invalid action
      • 8.3.1.5 set policy invalid action
      • 8.3.1.6 clear policy invalid action
    • 8.3.2 Assigning Classification Rules to Policy Profiles
      • 8.3.2.1 show policy class
      • 8.3.2.2 set policy classify
      • 8.3.2.3 Classification Precedence Rules
      • 8.3.2.4 clear policy class
      • 8.3.2.5 show policy maptable
      • 8.3.2.6 show vlanauthorization
      • 8.3.2.7 set vlanauthorization
      • 8.3.2.8 set policy maptable response
      • 8.3.2.9 clear policy maptable response
      • 8.3.2.10 set policy maptable
      • 8.3.2.11 clear policy maptable
    • 8.3.3 Assigning Ports to Policy Profiles
      • 8.3.3.1 show policy port
      • 8.3.3.2 set policy port
      • 8.3.3.3 clear policy port
• Port Priority and Classification Configuration
  • 9.1 Port Priority and Classification Configuration Summary
    • 9.1.1 Priority
    • 9.1.2 Priority Queueing Modes (Algorithms)
    • 9.1.3 Port Classification
  • 9.2 Process Overview: Priority, Classification, And Rate Limiting Configuration
  • 9.3 Port Priority and Classification Configuration Commands
    • 9.3.1 Configuring Port Priority
      • 9.3.1.1 show port priority
      • 9.3.1.2 set port priority
      • 9.3.1.3 clear port priority
    • 9.3.2 Configuring Priority to Transmit Queue Mapping
      • 9.3.2.1 show priority queue
      • 9.3.2.2 set priority queue
    • 9.3.3 Configuring Quality of Service (QoS)
      • 9.3.3.1 show port qos
      • 9.3.3.2 set port qos sp
      • 9.3.3.3 set port qos wrr
      • 9.3.3.4 set port qos hybrid
    • 9.3.4 Configuring Priority Classification
      • 9.3.4.1 show priority classification
      • 9.3.4.2 set priority classification
      • 9.3.4.3 Valid Values for Priority Classification
      • 9.3.4.4 clear priority classification
      • 9.3.4.5 set priority classification tosvalue
      • 9.3.4.6 set priority classification tosstatus
      • 9.3.4.7 show priority classification qtagoverride
      • 9.3.4.8 set priority classification qtagoverride
    • 9.3.5 Classification Precedence Rules
      • 9.3.5.1 set priority classification ingress
      • 9.3.5.2 clear priority classification ingress
    • 9.3.6 Configuring Port Traffic Rate Limiting
      • 9.3.6.1 show port ratelimit
      • 9.3.6.2 set port ratelimit
      • 9.3.6.3 clear port ratelimit
• IGMP Configuration
  • 10.1 IGMP Configuration Summary
    • 10.1.1 Process Overview: IGMP Configuration
  • 10.2 IGMP Configuration Command Set
    • 10.2.1 Enabling / Disabling IGMP
      • 10.2.1.1 show igmp
      • 10.2.1.2 set igmp
    • 10.2.2 Setting IGMP Query Interval and Response Time
      • 10.2.2.1 show igmp query-interval
      • 10.2.2.2 set igmp query-interval
      • 10.2.2.3 show igmp response-time
      • 10.2.2.4 set igmp response-time
    • 10.2.3 Reviewing IGMP Groups
      • 10.2.3.1 show igmp groups
    • 10.2.4 Configuring IGMP VLAN Registration
      • 10.2.4.1 show igmp mode
      • 10.2.4.2 set igmp mode vlan
      • 10.2.4.3 set igmp mode ipaddress
      • 10.2.4.4 set igmp mode
  • 10.3 About IGMP
    • 10.3.1 IGMP VLAN Registration
• Logging and Switch Network Management
  • 11.1 Process Overview: Logging and Network Management
  • 11.2 Logging and Network Management Command Set
    • 11.2.1 Configuring System Logging
      • 11.2.1.1 set logging
      • 11.2.1.2 show logging all
      • 11.2.1.3 show logging console
      • 11.2.1.4 set logging console
      • 11.2.1.5 show logging server
      • 11.2.1.6 set logging server
      • 11.2.1.7 clear logging server
      • 11.2.1.8 show logging default
      • 11.2.1.9 set logging default
      • 11.2.1.10 clear logging default
      • 11.2.1.11 show logging application
      • 11.2.1.12 set logging application
      • 11.2.1.13 clear logging application
      • 11.2.1.14 show logging audit-trail
      • 11.2.1.15 copy audit-trail
    • 11.2.2 Monitoring Switch Network Events and Status
      • 11.2.2.1 show eventlog
      • 11.2.2.2 clear eventlog
      • 11.2.2.3 history
      • 11.2.2.4 repeat
      • 11.2.2.5 show history
      • 11.2.2.6 set history
      • 11.2.2.7 show netstat
      • 11.2.2.8 show rmon stats
      • 11.2.2.9 show users
      • 11.2.2.10 disconnect
    • 11.2.3 Managing Switch Network Addresses
      • 11.2.3.1 show arp
      • 11.2.3.2 set arp
      • 11.2.3.3 clear arp
      • 11.2.3.4 show rad
      • 11.2.3.5 set rad
      • 11.2.3.6 show mac
      • 11.2.3.7 set mac
      • 11.2.3.8 clear mac
      • 11.2.3.9 show mac agingtime
      • 11.2.3.10 set mac agingtime
      • 11.2.3.11 clear mac agingtime
      • 11.2.3.12 show port stopaging
      • 11.2.3.13 set port stopaging
      • 11.2.3.14 clear port stopaging
      • 11.2.3.15 set mac algorithm
      • 11.2.3.16 show dns
      • 11.2.3.17 set dns domain
      • 11.2.3.18 clear dns domain
      • 11.2.3.19 set dns server
      • 11.2.3.20 clear dns server
      • 11.2.3.21 clear dns
      • 11.2.3.22 ping
      • 11.2.3.23 traceroute
      • 11.2.3.24 set mac multicast
      • 11.2.3.25 show mac multicast
    • 11.2.4 Configuring Simple Network Time Protocol (SNTP)
      • 11.2.4.1 show sntp
      • 11.2.4.2 set sntp client
      • 11.2.4.3 set sntp broadcastdelay
      • 11.2.4.4 set sntp poll-interval
      • 11.2.4.5 set sntp server
      • 11.2.4.6 clear sntp server
      • 11.2.4.7 set timezone
      • 11.2.4.8 clear timezone
    • 11.2.5 Configuring Node Aliases
      • 11.2.5.1 show nodealias
      • 11.2.5.2 show nodealias config
      • 11.2.5.3 set nodealias
      • 11.2.5.4 set nodealias maxentries
      • 11.2.5.5 clear nodealias
      • 11.2.5.6 clear nodealias config
    • 11.2.6 Configuring Convergence End Points (CEP) Phone Detection
      • 11.2.6.1 show cep
      • 11.2.6.2 set cep
      • 11.2.6.3 set cep port
      • 11.2.6.4 set cep policy
      • 11.2.6.5 set cep detection
      • 11.2.6.6 set cep detection type
      • 11.2.6.7 set cep detection address
      • 11.2.6.8 set cep detection protocol
      • 11.2.6.9 set cep detection porthigh
      • 11.2.6.10 set cep initialize
      • 11.2.6.11 clear cep
• IP Configuration
  • 12.1 Process Overview: Internet Protocol (IP) Configuration
  • 12.2 IP Configuration Command Set
    • 12.2.1 Configuring Routing Interface Settings
      • 12.2.1.1 show interface
      • 12.2.1.2 interface
      • 12.2.1.3 show ip interface
      • 12.2.1.4 ip address
      • 12.2.1.5 no shutdown
    • 12.2.2 Reviewing and Saving the Routing Configuration
      • 12.2.2.1 show running-config
      • 12.2.2.2 write
      • 12.2.2.3 no ip routing
    • 12.2.3 Reviewing and Configuring the ARP Table
      • 12.2.3.1 show ip arp
      • 12.2.3.2 arp
      • 12.2.3.3 ip gratuitous-arp-learning
      • 12.2.3.4 ip proxy-arp
      • 12.2.3.5 ip mac-address
      • 12.2.3.6 arp timeout
      • 12.2.3.7 clear arp-cache
    • 12.2.4 Configuring Broadcast Settings
      • 12.2.4.1 ip directed-broadcast
      • 12.2.4.2 ip forward-protocol
      • 12.2.4.3 ip helper-address
    • 12.2.5 Reviewing IP Traffic and Configuring Routes
      • 12.2.5.1 show ip protocols
      • 12.2.5.2 show limits
      • 12.2.5.3 show ip traffic
      • 12.2.5.4 clear ip stats
      • 12.2.5.5 show ip route
      • 12.2.5.6 ip route
      • 12.2.5.7 ip icmp
      • 12.2.5.8 ping
      • 12.2.5.9 traceroute
• Routing Protocol Configuration
  • 13.1 Process Overview: Routing Protocol Configuration
    • 13.1.1 Configuring RIP
      • 13.1.1.1 router rip
      • 13.1.1.2 network
      • 13.1.1.3 neighbor
      • 13.1.1.4 distance
      • 13.1.1.5 ip rip offset
      • 13.1.1.6 timers
      • 13.1.1.7 ip rip send version
      • 13.1.1.8 ip rip receive version
      • 13.1.1.9 key chain
      • 13.1.1.10 key
      • 13.1.1.11 key-string
      • 13.1.1.12 accept-lifetime
      • 13.1.1.13 send-lifetime
      • 13.1.1.14 ip rip authentication keychain
      • 13.1.1.15 ip rip authentication mode
      • 13.1.1.16 no auto-summary
      • 13.1.1.17 ip rip disable-triggered-updates
      • 13.1.1.18 ip split-horizon
      • 13.1.1.19 passive-interface
      • 13.1.1.20 receive-interface
      • 13.1.1.21 distribute-list
      • 13.1.1.22 redistribute
    • 13.1.2 Configuring OSPF
      • 13.1.2.1 router ospf
      • 13.1.2.2 network
      • 13.1.2.3 router id
      • 13.1.2.4 ip ospf cost
      • 13.1.2.5 ip ospf priority
      • 13.1.2.6 timers spf
      • 13.1.2.7 ip ospf retransmit-interval
      • 13.1.2.8 ip ospf transmit-delay
      • 13.1.2.9 ip ospf hello-interval
      • 13.1.2.10 ip ospf dead-interval
      • 13.1.2.11 ip ospf authentication-key
      • 13.1.2.12 ip ospf message digest key md5
      • 13.1.2.13 distance ospf
      • 13.1.2.14 area range
      • 13.1.2.15 area authentication
      • 13.1.2.16 area stub
      • 13.1.2.17 area default cost
      • 13.1.2.18 area nssa
      • 13.1.2.19 area virtual-link
      • 13.1.2.20 passive-ospf
      • 13.1.2.21 redistribute
      • 13.1.2.22 database-overflow
      • 13.1.2.23 show ip ospf
      • 13.1.2.24 show ip ospf database
      • 13.1.2.25 show ip ospf border-routers
      • 13.1.2.26 show ip ospf interface
      • 13.1.2.27 show ip ospf neighbor
      • 13.1.2.28 show ip ospf virtual-links
      • 13.1.2.29 clear ip ospf process
    • 13.1.3 Configuring DVMRP
      • 13.1.3.1 ip dvmrp
      • 13.1.3.2 ip dvmrp metric
      • 13.1.3.3 show ip dvmrp route
      • 13.1.3.4 show ip mroute
    • 13.1.4 Configuring IRDP
      • 13.1.4.1 ip irdp
      • 13.1.4.2 ip irdp maxadvertinterval
      • 13.1.4.3 ip irdp minadvertinterval
      • 13.1.4.4 ip irdp holdtime
      • 13.1.4.5 ip irdp preference
      • 13.1.4.6 ip irdp address
      • 13.1.4.7 no ip irdp multicast
      • 13.1.4.8 show ip irdp
    • 13.1.5 Configuring VRRP
      • 13.1.5.1 router vrrp
      • 13.1.5.2 create
      • 13.1.5.3 address
      • 13.1.5.4 priority
      • 13.1.5.5 advertise-interval
      • 13.1.5.6 critical-ip
      • 13.1.5.7 preempt
      • 13.1.5.8 enable
      • 13.1.5.9 ip vrrp authentication-key
      • 13.1.5.10 ip vrrp message-digest-key
      • 13.1.5.11 show ip vrrp
• Security Configuration
  • 14.1 Overview of Security Methods
  • 14.2 Process Overview: Security Configuration
  • 14.3 Security Configuration Command Set
    • 14.3.1 Configuring RADIUS
      • 14.3.1.1 show radius
      • 14.3.1.2 set radius
      • 14.3.1.3 clear radius
      • 14.3.1.4 show radius accounting
      • 14.3.1.5 set radius accounting
      • 14.3.1.6 clear radius accounting
    • 14.3.2 Configuring 802.1X Authentication
      • 14.3.2.1 show dot1x
      • 14.3.2.2 show dot1x auth-config
      • 14.3.2.3 set dot1x
      • 14.3.2.4 set dot1x auth-config
      • 14.3.2.5 set dot1x port
      • 14.3.2.6 clear dot1x auth-config
      • 14.3.2.7 show eapol
      • 14.3.2.8 set eapol
    • 14.3.3 Configuring MAC Authentication
      • 14.3.3.1 show macauthentication
      • 14.3.3.2 show macauthentication session
      • 14.3.3.3 set macauthentication
      • 14.3.3.4 set macauthentication password
      • 14.3.3.5 set macauthentication port
      • 14.3.3.6 set macauthentication portinitialize
      • 14.3.3.7 set macauthentication macinitialize
      • 14.3.3.8 set macauthentication reauthentication
      • 14.3.3.9 set macauthentication portreauthenticate
      • 14.3.3.10 set macauthentication macreauthenticate
      • 14.3.3.11 set macauthentication reauthperiod
      • 14.3.3.12 set macauthentication quietperiod
    • 14.3.4 Configuring MAC Locking
      • 14.3.4.1 show maclock
      • 14.3.4.2 show maclock stations
      • 14.3.4.3 set maclock enable
      • 14.3.4.4 set maclock disable
      • 14.3.4.5 set maclock
      • 14.3.4.6 set maclock firstarrival
      • 14.3.4.7 set maclock static
      • 14.3.4.8 set maclock move
      • 14.3.4.9 clear maclock static
      • 14.3.4.10 show maclock autostatic
      • 14.3.4.11 set maclock autostatic
      • 14.3.4.12 set maclock autostatic isl
      • 14.3.4.13 set maclock autostatic publicvlan
      • 14.3.4.14 set maclock autostatic publicmac
      • 14.3.4.15 set maclock autostatic passthroughmac
      • 14.3.4.16 clear maclock autostatic
      • 14.3.4.17 set maclock trap
      • 14.3.4.18 clear maclock
    • 14.3.5 Configuring Port Web Authentication (PWA)
      • 14.3.5.1 show pwa
      • 14.3.5.2 set pwa
      • 14.3.5.3 set pwa hostname
      • 14.3.5.4 set pwa displaylogo
      • 14.3.5.5 set pwa refreshtime
      • 14.3.5.6 set pwa nameservices
      • 14.3.5.7 set pwa ipaddress
      • 14.3.5.8 set pwa protocol
      • 14.3.5.9 set pwa enhancedmode
      • 14.3.5.10 set pwa guestname
      • 14.3.5.11 set pwa guestpassword
      • 14.3.5.12 set pwa gueststatus
      • 14.3.5.13 set pwa initialize
      • 14.3.5.14 set pwa quietperiod
      • 14.3.5.15 set pwa maxrequests
      • 14.3.5.16 set pwa portcontrol
    • 14.3.6 Configuring Secure Shell (SSH)
      • 14.3.6.1 show ssh
      • 14.3.6.2 set ssh
      • 14.3.6.3 ssh
      • 14.3.6.4 set ssh ciphers
      • 14.3.6.5 clear ssh ciphers
      • 14.3.6.6 set ssh port
      • 14.3.6.7 set ssh mac
      • 14.3.6.8 clear ssh mac
      • 14.3.6.9 set ssh rekeyintervalseconds
      • 14.3.6.10 set ssh passwordguesses
      • 14.3.6.11 set ssh logingracetime
      • 14.3.6.12 clear ssh keys
      • 14.3.6.13 clear ssh config
    • 14.3.7 Configuring Access Lists
      • 14.3.7.1 show access-lists
      • 14.3.7.2 access-list (standard)
      • 14.3.7.3 access-list (extended)
      • 14.3.7.4 ip access-group
    • 14.3.8 Configuring Denial of Service Prevention
      • 14.3.8.1 show HostDos
      • 14.3.8.2 HostDos
      • 14.3.8.3 clear hostdos-counters
    • 14.3.9 Configuring Flow Setup Throttling (FST)
      • 14.3.9.1 show flowlimit
      • 14.3.9.2 set flowlimit
      • 14.3.9.3 set flowlimit limit
      • 14.3.9.4 set flowlimit class
      • 14.3.9.5 clear flowlimit action
      • 14.3.9.6 set flowlimit shutdown
      • 14.3.9.7 set flowlimit notification
      • 14.3.9.8 set flowlimit clearstats
  • 14.4 Working with Security Configurations
    • 14.4.1 Host Access Control Authentication (HACA)
    • 14.4.2 802.1X Port Based Network Access Control Overview
    • 14.4.3 MAC Authentication Overview
      • 14.4.3.1 Authentication Method Sequence
      • 14.4.3.2 Concurrent Operation of 802.1X and MAC Authentication
    • 14.4.4 MAC Authentication Control
    • 14.4.5 RADIUS Filter-ID Attribute and Dynamic Policy Profile Assignment
• Index
  • Numerics
  • A
  • B
  • C
  • D
  • E
  • F
  • G
  • H
  • I
  • J
  • L
  • M
  • N
  • O
  • P
  • Q
  • R
  • S
  • T
  • U
  • V
  • W