Foxconn N570SM2AA User Manual
Page 18
Chapter 2 Installation Instructions
11
Memory
This motherboard includes four 240-pin slots with 1.8V for DDR2. These slots
support 256 Mb, 512 Mb and 1 Gb DDR2 technologies for x8 and x16 devices, and
support dual channel DDR2 memory technology up to 10.7GB/s. You must install
at least one memory bank to ensure normal operation.
Recommended Memory Configurations
The following table list is the recommended memory configurations. Please
install the memory according to the list.
Installation of DDR2 Memory
1. There is only one gap near the center of the DIMM slot, and the memory
module can be fixed in one direction only. Unlock a DIMM slot by pressing the
module clips outward.
2. Align the memory module to the DIMM slot, and insert the module vertically
into the DIMM slot.
3. The plastic clips at both sides of the DIMM slot will lock automatically.
Single Channel
128 Pins
112 Pins
Dual Channel
Mode
DIMM1
DIMM2
DIMM3
DIMM4
Populated
Populated
Populated
Populated
Populated
Populated
Populated
Populated
Populated
Populated
Populated
Populated
Populated
Populated
Populated
Populated
Populated
Populated
Populated
Populated
PDF 文件使用 "pdfFactory" 试用版本创建