Foxconn N570SM2AA User Manual
Page 37
Chapter 3 BIOS Description
30
v
Security Option
When it is set to “Setup”, a password is required to enter the CMOS Setup
screen; When it is set to “System”, a password is required not only to enter
CMOS Setup, but also to start up your PC.
v
APIC Mode
This option is used to enable or disable APIC function.
v
Full Screen LOGO Show
This option allows you to enable or disable the full screen logo. The available
setting values are: Disabled and Enabled.
v
Small Logo (EPA) Show
This option allows you to enable or disable the EPA logo. The available setting
values are: Disabled and Enabled.
v
Typematic Rate (Chars/Sec)
Use this option to define how many characters per second a held-down key
generated.
v
Typematic Delay (Msec)
Use this option to define how many milliseconds must elapse before a held-
down key begins generating repeat characters.
v
Boot Up NumLock Status
This option defines if the keyboard Num Lock key is active when your system
is started.
v
Typematic Rate Setting
If this option is enabled, you can use the following two items to see the typematic
rate and the typematic delay settings for your keyboard.
PDF 文件使用 "pdfFactory" 试用版本创建