Foxconn N570SM2AA User Manual
Page 81
Appendix
74
Installing the RAID Driver (for bootable RAID Array)
1. Create an F6 install floppy by using the “-x” option, then copy all files in “...\IDE\WinXP\sataraid”
to a floppy disk. (For W indows 2000, substitute “W in2K” in the path.) After you complete the
RAID BIOS setup, boot from the W indows CD, and the Windows Setup program starts.
2. Press F6 and wait for the Windows Setup screen to appear.
3. Specify the NVIDIA drivers:
(1) Insert the floppy that has the RAID driver, press S. The W indows Setup screen appears
as below:
(2) Select “NVIDIA RAID CLASS DRIVER” and then press Enter.
(3) Press S again at the Specify Devices screen, then press Enter.
(4) Select “NVIDIA NForce Storage Controller” and then press Enter. The following Windows
Setup screen appears listing both drivers:
PDF 文件使用 "pdfFactory" 试用版本创建