Foxconn N570SM2AA User Manual
Page 31
Chapter 3 BIOS Description
24
Halt On
This category determines whether or not the computer will stop if an error is
detected during powering up.
All Errors
Whenever the BIOS detects a nonfatal error, the system
will stop and you will be prompted.
No Errors
The system boot will not stop for any errors that may
be detected.
All, But Keyboard
The system boot will not stop for a keyboard error; but
it will stop for all other errors.
All, But Diskette
The system boot will not stop for a diskette error; but
it will stop for all other errors.
All, But Disk/Key
The system boot will not stop for a keyboard or disk
error, but it will stop for all other errors.
Memory
This is a Display-Only Category, determined by POST (Power On Self Test) of
the BIOS.
Base Memory
The BIOS POST will determine the amount of base (or
conventional) memory installed in the system.
Extended Memory The BIOS determines how much extended memory
is present during the POST.
Total Memory
Total memory of the system.
Drive A
This option allows you to select the kind of FDD to be installed,including
“None”, [360K, 5.25 in], [1.2M, 5.25 in], [720K, 3.5 in], [1.44M, 3.5 in] and [2.88 M, 3.5
in].
PDF 文件使用 "pdfFactory" 试用版本创建