Foxconn N570SM2AA - Manual (Page 40)

Chapter 3 BIOS Description
33
v Primary Master/Slave PIO
These two items let you assign which kind of PIO (Programmer Input/Output)
is used by IDE devices. Choose “Auto” to let the system auto detect which PIO
mode is best, or select a PIO mode from 0-4.
v Primary Master/Slave UDMA
UDMA technology provides faster access to IDE devices. If you install a device
that supports UDMA, change the appropriate items on this list to Auto. The
available setting values are: Disabled and Auto.
v IDE DMA transfer access
This option is used to enable or disable IDE DMA transfer access.
v Serial-ATA Cotroller
This option is used to enable or disable Serial-ATA cotroller.
v IDE Prefetch Mode
This option is used to enable or disable IDE prefetch mode.
IDE Function Setup Menu
v IDE HDD Block Mode
This option is used to set whether the IDE HDD block mode is allowed.
v RAID Config
Press <Enter> to set the items of RAID configuration function.
v OnChip IDE Channel 0
This option is used to set the onchip IDE channel 0. The available settings
are: Disabled and Enabled.
PDF 文件使用 "pdfFactory" 试用版本创建 Ж Ж www.fineprint.com.cn