Foxconn N570SM2AA User Manual
Page 76
Appendix
69
Entering the RAID BIOS Setup
1. After rebooting your PC, wait until you see the RAID software prompting you to
press
F10. The RAID prompt appears as part of the system POST and boot process
prior to loading OS.
2. Press<N>, and the NVIDIA RAID Utility --- Define a New Array window will appear.
The default RAID Mode is set to Mirroring and the default Striping Block is set to
Optimal.
Understanding the “Define a New Array” Window
Use the Define a New Array window to
• Select the RAID Mode
• Set up the Striping Block
• Specify which disks to use for the RAID Array
Depending on the platform used, the system have one or more adapters. In a typical
system there are usually one channel and multiple adapters, and each adapter
have a slave and a master.
The adapter/channel/master/slave status of each hard disk is given in the Loc
(location) columns of the Free Disks and Array Disks lists.
1. 0. M
M: Master
S: Slave
0: Channel
Adapter 0 is used for PATA drives;
Adapter 1 is used for SATA drives.
PDF 文件使用 "pdfFactory" 试用版本创建