Fortinet MR1 - Manual (Page 113)

113
Note: Before adding a port to a port-channel, set the physical mode of the port. See ‘speed’
command.
Syntax
channel-group <logical slot/port>
<logical slot/port> - Port-Channel Interface number.
Default Setting
None
Command Mode
Interface Config
Command Usage
1. The maximum number of members for each Port-Channel is 6.
5.2.6.10 delete-channel-group
This command deletes the port from the port-channel (LAG). The interface is a logical slot
and port number of a configured port-channel.
Syntax
delete-channel-group <logical slot/port>
<logical slot/port> - Port-Channel Interface number.
Default Setting
None
Command Mode
Interface Config
This command deletes all configured ports from the port-channel (LAG). The interface is a
logical slot and port number of a configured port-channel.