Fortinet MR1 - Manual (Page 315)

315
the default precedence does not update the precedence of existing static routes, even if they
were assigned the original default precedence. The new default precedence will only be
applied to static routes created after invoking the "ip route precedence" command.
Syntax
ip route precedence <1-255>
<1-255> - Default precedence value of static routes. The range is 1 to 255.
Default Setting
The default precedence value is 1.
Command Mode
Global Config
6.2.2.7 ip forwarding
This command enables forwarding of IP frames.
Syntax
ip forwarding
no ip forwarding
no - Disable forwarding of IP frames.
Default Setting
Enabled
Command Mode
Global Config
6.2.2.8 ip directed-broadcast
This command enables the forwarding of network-directed broadcasts. When enabled,
network directed broadcasts are forwarded. When disabled they are dropped.
Syntax
ip directed-broadcast