6 ip pimsm mode – Fortinet MR1 User Manual

Page 418

Advertising
background image

418

ip pimsm staticrp <rp-address> <group-address> <group-mask>

no ip pimsm staticrp <rp-address> <group-address> <group-mask>

< rp-address > - the IP Address of the RP.
< group-address > - the group address supported by the RP.
< group-mask > - the group mask for the group address.
no -
This command is used to delete RP IP address for the PIM-SM router. The parameter <rp-address>
is the IP address of the RP. The parameter <group-address> is the group address supported by the RP.
The parameter <group-mask> is the group mask for the group address.

Default Setting

Disabled

Command Mode

Global Config

7.5.2.6 ip pimsm mode

This command sets administrative mode of PIM-SM multicast routing on a routing interface
to enable.

Syntax

ip pimsm mode

no ip pimsm mode

no - This command sets administrative mode of PIM-SM multicast routing on a routing interface to
disabled.

Default Setting

Disbaled

Command Mode

Interface Config

Advertising