Fortinet MR1 - Manual (Page 166)

166
Privileged Exec
Display Message
Port Mode: The administration mode of spanning tree.
Port Up Time Since Counters Last Cleared: Time since the port was reset, displayed in days, hours,
minutes, and seconds.
STP BPDUs Transmitted: Spanning Tree Protocol Bridge Protocol Data Units sent.
STP BPDUs Received: Spanning Tree Protocol Bridge Protocol Data Units received.
RST BPDUs Transmitted: Rapid Spanning Tree Protocol Bridge Protocol Data Units sent.
RST BPDUs Received: Rapid Spanning Tree Protocol Bridge Protocol Data Units received.
MSTP BPDUs Transmitted: Multiple Spanning Tree Protocol Bridge Protocol Data Units sent.
MSTP BPDUs Received: Multiple Spanning Tree Protocol Bridge Protocol Data Units received.
5.4.1.3 show spanning-tree vlan
This command displays the association between a VLAN and a multiple spanning tree
instance. The <1-3965> corresponds to an existing VLAN ID.
Syntax
show spanning-tree vlan <1-3965>
<vlanid> - VLAN ID (Range: 1 - 3965).
Default Setting
None
Command Mode
Privileged Exec
Display Message
VLAN Identifier: displays VLAN ID.
Associated Instance: Identifier for the associated multiple spanning tree instance or "CST" if associated
with the common and internal spanning tree.
5.4.1.4 show spanning-tree mst
This command displays settings and parameters for the specified multiple spanning tree
instance. The instance <0-4094> is a number that corresponds to the desired existing
multiple spanning tree instance ID. The following details are displayed.