Fortinet MR1 - Manual (Page 625)

625
Configuring Interface’s Multicast Configuration Page
Selection Criteria
Slot/Port - Select the routing interface you want to configure from the dropdown menu.
Configurable Data
TTL Threshold - Enter the TTL threshold below which a multicast data packet will not be forwarded from
the selected interface. You should enter a number between 0 and 255. If you enter 0 all multicast packets
for the selected interface will be forwarded. You must configure at least one router interface before you
will see this field.
Command Buttons
Submit - Send the updated configuration to the router. Configuration changes take effect immediately.
These changes will not be retained across a power cycle unless a save is performed.
Viewing Multicast MRoute Summary Page
This screen displays selected contents of the Mroute Table in tabular form. If there are no
routes in the table you will not be presented with the Selection Criteria.
Selection Criteria