Furuno 1834C-BB - Manual (Page 100)

3. PLOTTER OPERATION
3-37
001
34
°
44.111'N
135
°
21.134'W
001WPT
002
34
°
43.432'N
135
°
41.456'W
002WPT
003
34
°
14.124'N
135
°
21.567'W
003WPT
004
34
°
34.490'N
135
°
51.387'W
004WPT
LOCAL LIST
▲
Waypoint list for editing a
route (local list)
9. Enter the route name of the second route as you did for the first route.
10. Press the D: SAVE soft key.
11. Press the MENU key to close the menu.
Note:
The maximum number of waypoints in a route is 35. If this number is exceeded an
error message appears. In this case, delete waypoints in one or both routes so the total
number of waypoints does not exceed 35.
3.9.3 Inserting waypoints
Waypoints can be inserted in a route as follows:
Inserting a waypoint from the route list
1. Press the MENU key to open the menu.
2. Press the C: WAYPOINTS/ROUTES soft key.
3. Press the B: ROUTES soft key.
4. Use the Trackball to select a route.
5. Press the C: EDIT ROUTE soft key. The route name screen appears.
6. Press the B: LOCAL LIST soft key.
EDIT
ROUTE
▲
90.0
°
2.86nm
322.6 °
3.08nm
75.2
°
4.99nm
152.5
°
19.87nm
LEG
ROUTE NAME: 001
COMMENT:
01 48
°
18.290'N
123
°
14.286'W 007WPT
02 48 ° 17.341'N
123
°
10.232'W 005WPT
03 48
°
20.261'N
123
°
11.658'W 003WPT
04 48
°
19.862'N
123 ° 04.190'W 006WPT
COORD
TYPE
D
RETURN E
INSERT
WPT
A
REMOVE
WPT
B
CHANGE
WPT
C
Edit route menu
7. Use the Trackball to place the cursor at the location
where you want to insert a waypoint.
8. Press the A: INSERT WPT or C: CHANGE WPT soft
key as appropriate. The local waypoint list appears.
9. Use the Trackball to select the waypoint you want to
insert. (You can switch between the local list and
alphanumeric list by using the C: LOCAL LIST and D:
ALPHA LIST soft keys.)
10. Press the A: SELECT WPT or A: CHANGE WPT soft
key, whichever is displayed.
11. Press the MENU key to close the menu.