Furuno 1834C-BB - Manual (Page 183)

7. CUSTOMIZING YOUR UNIT
7-28
WAAS SETUP
Press the C: WAAS SETUP soft key to show the WAAS SETUP display.
Note:
This function requires GP-320B antenna.
Contents of WAAS SETUP menu
Item Description Settings
WAAS MODE Select ON to use the WAAS mode. On, Off
WAAS SEARCH WAAS satellite can be searched automatically
or manually. For manual search, enter
appropriate WAAS satellite number. Auto, Manual
WAAS ALARM When the WAAS signal is lost, the audible
alarm sounds with the visual message “NO
WAAS SIGNAL.”
On: Alarm continues to sound until the WAAS
positioning mode is available again or the alarm
is recognized by key operation.
Off: Alarm sounds three times.
On, Off
CORRECTION
DATA SET Selects the type of message for WAAS
correction. Use “02 (default setting)” until the
system becomes operational. 00 to 27, 99
7.7.3 TD display setup
The TD SETUP menu sets which Loran C or Decca chain to use to display TD position.
(Connection of a Loran C or Decca navigator is not necessary to display TD position.)
1. Press the MENU key.
2. Press the E: SYSTEM CONFIGURATION, B: NAV OPTION and C: TD SETUP soft
keys to display the TD SETUP menu.
TD
SETUP
LORAN-C
GRI 9940 11-27
U.S. WEST COAST
CORRECTION 1 +000.0
µ
s
CORRECTION 2 +000.0
µ
s
DECCA
CHAIN 01 R-G
S BALTIC
CORRECTION 1 +00.00 lane
CORRECTION 2 +00.00 lane
RETURN E
EDIT A
TD setup menu