Furuno 1834C-BB - Manual (Page 72)

3. PLOTTER OPERATION
3-9
3.3 Shifting the Display
The plotter display can be shifted as below.
1. Use the Trackball to locate the cursor at a screen edge. The screen shifts in the
direction opposite of cursor location.
2. To turn off the cursor, press the C: CENTER soft key. This also returns the own ship
marker to the screen center.
3.4 Chart Scale
Chart scale (range) may be selected with the [RANGE -] or [RANGE +] key. The
[-] key shrinks the chart range (image is expanded); the [+] key expands the cart
range (image is shrunk). The available ranges are as below.
Charts scales
nm 0.125 0.25 0.5 1 2 4 8 16 32 64 128 256 512 1024 2048 *
km 0.23 0.46 0.93 1.85 3.70 7.41 14.8 29.6 59.3 119 237 474 948 1896 3792
sm 0.144 0.29 0.58 1.15 2.30 4.60 9.21 18.4 36.8 73.7 147 295 589 1178 2356
*: 2046 or 2047 in high latitude
3.5 Chart Cards
3.5.1 Chart card overview
Your system reads Navionics GOLD charts
or C-MAP NT MAX charts, depending on
the type of processor unit you have.
When you insert a suitable chart card in
the slot and own ship is near any
cartographic object, a chart appears. If a
wrong card is inserted or a wrong chart
scale is selected, landmasses will appear
hollow. Chart icons appear at the top of the
display to help you select a suitable chart
scale. The table below shows the chart
icons and their meanings.
Icon Meaning
Chart scale is too large.
Operate the RANGE key to
adjust chart scale.
Suitable chart scale is
selected.
Proper card is not inserted or
chart scale is too small. Press
the ZOOM IN soft key to adjust
chart scale.
Chart icons and their meanings