Furuno DD-80 - Manual (Page 117)

Index – 1
INDEX
A
Alarms 7-1–7-4
anchor watch 7-2
arrival 7-1
clearing aural and visual alarms 7-1
cross track error (XTE) 7-2
depth 7-4
disabling 7-1
speed 7-3
trip 7-3
water temperature 7-4
Altitude unit 8-4
Anchor watch alarm 7-2
Apportioning the memory 2-5
Arrival alarm 7-1
B
Bearing reference 2-5
Brilliance adjustment 1-3
Buoy data
loading 8-8
viewing 8-9
C
Centering own ship 2-2
Centering the cursor 2-2
Contrast adjustment 1-3
Control description 1-1
Course bar tone 8-4
Cross track error (XTE) alarm 7-2
Cursor
centering 2-2
cursor state and data 2-1
shifting 2-2
size 8-5
D
Data display 6-1
Data output 8-6–8-8
Decca chains A-6
Demo display 6-4
Depth alarm 7-4
Depth unit 8-4
Destination
cancelling 5-5
setting by cursor 5-1
setting by MOB/event position 5-3
setting through waypoint list 5-3
setting using route 5-4
DGPS reference station list A-7
DGPS station selection 8-11
Diagnostic tests
display 9-5
keyboard 9-4
memory and I/O ports 9-4
Disabling satellites 8-2
Display mode 1-3
Display orientation 2-1
Display test 9-5
Distance unit 8-3
E
Enlarging characters 8-5
Enlarging the display 2-1
Enter
event marks 3-2
marks 3-1
MOB mark 3-3
position 8-3
routes 4-5
waypoints at own ship's position 4-3
waypoints by cursor 4-1
waypoints by LOPs 6-3
waypoints by MOB/event position 4-3
waypoints through waypoint list 4-3
Erase
entire route 4-7
marks (all types) 3-1
route waypoints 4-6
route waypoints (flags) 5-6
track 2-3
waypoints by cursor 4-4
waypoints through route list 4-5
Error messages 9-2
Event mark
setting as destination 5-3
Event marks
entering 3-2
shape 3-3
F
Fix mode 8-2
G
Geodetic chart list A-4
Geodetic datum 8-2
Glossary A-12
GPS introduction to 10-1–10-2
GPS memory clearing 9-1
GPS menu
description 8-1
disabling satellites 8-2
fix mode 8-2
geodetic datum 8-2
GPS position smoothing 8-2
GPS speed smoothing 8-2