FARGO electronic Pro-LX Laminating Card Printer/Encoder User Manual
Page 10
RESTRICTED USE ONLY
Fargo Electronics, Inc.
Pro-LX Laminating Card Printer/Encoder User Guide (Rev. 5.0)
10
Reviewing Pro-LX Sequence of Operations (continued)
Step Process
54
The Flipper Clutch engages.
55
The Flipper table returns to level.
56
The Flipper Clutch disengages.
57
The Card feeds back to Print TOF Sensor then forward to the Lamination card
Sensor. All Stop.
58
The Laminate Ribbon Drive activates until Laminate Ribbon Sensor detects patch
mark.
At this time the Thermocouple is checking the temperature of the Laminate roller
and activating the heater core if needed.
59
The Lamination Stepper is activated.
60
The Card is fed to the platen roller. All Stop
61
The Lamination Cover Sensor checks for closed state.
62
The Headlift Motor engages.
63
The Headlift Sensor detects closed state.
64
The Headlift Motor disengages.
65
The Lamination Stepper Motor and Laminate Ribbon drive engage for the distance
of the card. All Stop.
66
The Headlift Motor engages.
67
The Headlift Sensor detects open state.
68
The Headlift Motor disengages.
69
The Lamination Stepper Motor is activated and card is fed out of the printer.