FARGO electronic Pro-LX Laminating Card Printer/Encoder - Manual (Page 122)

RESTRICTED USE ONLY Fargo Electronics, Inc.
Pro-LX Laminating Card Printer/Encoder User Guide (Rev. 5.0) 122
Using the Magnetic Track Selection (continued)
Step Procedure
1 Select a Track selection to:
a. Change all options separately for each of the three individual Tracks.
b. Select the Default button for each of the separate Tracks to set these
options back to the ISO Standard settings (once they have been changed).
(Important: Please refer to the following for a description of all Magnetic
Track Options.)
2 Use the Magnetic Track Selections to configure the way in which each of the
three magnetic Tracks will encode.
(Note #1: They do not designate which Tracks the Printer will encode (e.g., to
encode only Track 2). This must be done through the specific software program.)
(Note #2: Although the Printer Driver will remember the settings specified for
each of the three Tracks, the Printer Driver will always default to displaying the
options for Track 1 whenever the Printer Driver setup screen is first opened.)