FARGO electronic Pro-LX Laminating Card Printer/Encoder - Manual (Page 75)

RESTRICTED USE ONLY Fargo Electronics, Inc.
Pro-LX Laminating Card Printer/Encoder User Guide (Rev. 5.0) 75
Resolving the Incorrect Image Darkness problems
Symptom: Printed cards are too dark or too light.
Step Procedure
1 Run a self-test to identify problems with the driver settings. See Running the Self
Test in Section 2, page 87.
2 Adjust the Dye-Sub Intensity setting within the Image Color tab of the Printer
Driver. See
Using the Image Color tab procedure in Section 3, page 157.
Continued on the next page