FARGO electronic Pro-LX Laminating Card Printer/Encoder - Manual (Page 37)

RESTRICTED USE ONLY Fargo Electronics, Inc.
Pro-LX Laminating Card Printer/Encoder User Guide (Rev. 5.0) 37
Reviewing the Top Line LCD Messages (continued)
Message Cause
Flipping Card Indicates card is being flipped for backside printing.
Head-down Failed Printhead is unable to lower itself. See the Resolving the Headlift
Error Message procedure in Section 2, page 49.
Head-up Failed Printhead is unable to raise itself. See the Resolving the Headlift
Error Message procedure in Section 2, page 49.
Invalid Key Card The SmartGuard Access Card is invalid or is inserted backwards or
up side down. Appears only when using the SmartGuard Security
Feature. See the SmartGuard User
’
s Guide for more information.
Invalid Password An invalid SmartGuard password was entered. Appears only when
using the SmartGuard Security Feature. See the SmartGuard User
’
s
Guide for more information.
Key Card Ready Indicates SmartGuard or SmartShield data has successfully been
encoded onto the SmartGuard Access Card. Appears only when
using the SmartGuard Security Feature. See the SmartGuard User
’
s
Guide for more information.
Key Disabled Indicates the SmartGuard Security Feature has been disabled.
Appears only when using the SmartGuard Security Feature. See the
SmartGuard User
’
s Guide for more information.
Key Not Inserted Attempts are made to print without the SmartGuard Access Card
inserted. Appears only when using the SmartGuard Security
Feature. See the SmartGuard User
’
s Guide for more information.
Continued on the next page