FARGO electronic Pro-LX Laminating Card Printer/Encoder - Manual (Page 72)

RESTRICTED USE ONLY Fargo Electronics, Inc.
Pro-LX Laminating Card Printer/Encoder User Guide (Rev. 5.0) 72
Resolving data intended for the Magnetic Stripe (being printed on
the card) problem
Step Procedure
1 Confirm that the application is formatting the magnetic string correctly. See the
Using the Magnetic Track Selection option procedure in Section 3, page 121.
2 a. Use WordPad (a Windows 95/ 98/ ME/ NT/ 2000/XP word processing
program in the Accessories Program Group).
b. Go to the File menu and select Page Setup.
c. Click on the Printer button and select the Pro-LX Card Printer.
d. Click OK and reset all four margins to zero.
(Note: WordPad will automatically replace the values with it
’
s minimum margins.)
e. Open the program and type:
“
~1%JULIEANDERSON^1234567890?
”
then,
go to File on the menu bar and select Print. (Note: The Printer should then
feed a card into the Encoder and magnetically encode it.)