FARGO electronic Pro-LX Laminating Card Printer/Encoder - Manual (Page 77)

RESTRICTED USE ONLY Fargo Electronics, Inc.
Pro-LX Laminating Card Printer/Encoder User Guide (Rev. 5.0) 77
Resolving the Ribbon Wrinkle problems
Symptom: Printed cards have off-colored lines or streaks on them.
Step Procedure
1 Confirm that the Printer is using the most current driver via: http://www.fargo.com
2 Reduce the Dye-Sub Intensity setting within the Image Color tab of the Printer
Driver. See
Using the Image Color tab procedure in Section 3, page 157.
Continued on the next page