Furuno CI-35H - Manual (Page 27)

3-3
FUNDAMENTAL DATA SECTION
SHIP’S SPEED/COURSE
Display
Note: The CI-35/35H updates ship’s speed and course display in every 3 seconds with an averag-
ing time selected in MENU 1. (See page 3-5 for averaging time setting.)
The course display appears in degrees and 32-point notation. If desired their locations can be swapped
by changing the setting of an internal DIP switch. (See installation manual.)
0
10
20
10
20
3°
0.4 kt
SPEED
8.0
kt
W
273°
COURSE MODE COMPASS
GT 270.0 1.2
17 : 41 : 00
3.0
kt
2.0
kt
4.0
kt
NE
45°
SE
135°
SW
225°
DEP TIDE DIRECTION TRIP
0.00 NM
RANGE
10.0kt
0.5
NM
AVERAGE
15sec
DIST
0.5
NM NW
N
NE
-1 -2 1 2
1
25
2
50
3
75
Ship’s speed and course (true)
Ship’s heading
Course calibration angle
(Displayed in NAV mode)
Calib. by GT : GRN
Calib. by WT : L-BLU
Manual calib. : WHT
,,,,
,,,,
N
Heading
(Compass bearing)
True course
Speed toward true course
Ground speed, water speed or
Navigator speed depending on
the tracking mode.