Furuno CI-35H - Manual (Page 46)

4-4
* MENU * KNOB ITEM
Jan/15/1997
KNOB SETUP
END : MENU KEY
MENU MODE : MENU1 MENU2 MENU3 MENU4
REF DEPTH : OFF E/S
BEAM TEST : OFF
SELF CHECK : SINGLE
DEMO DATA : OFF DP3. 4 LOG10
TRIP RESET
DATE/TIME
: RESET (0. 00)
: TIME DATE
MENU SELECT : LOCK UNLOCK
MENU SET : FACTORY
Knob
Knob
CONT1 PANEL ECHO
8 Lock/unlock switch for all the protected preset items shown in red letters.
7 Calls time set or date set sub-window.
6 Clear (zero) the total mileage count. (Value in parentheses shows total mileage.)
5 Simulation data selection for demonstration
“OFF” for normal operation (See note 3 below.)
4 Test method and test item selection switch (See page 4-2.)
3 Shows beam number(s) being tested.
“OFF”: Test off (normal operation) “F1”: Testing beam 1
“F12”: Testing beams 1 and 2 “F13”: Testing beams 1 and 3
“F23”: Testing beams 2 and 3
2 Selection of reference depth data source for bottom search in ground tracking mode
“OFF”: internal “E/S”: depth data from external echo sounder
1 Press key to store the settings and to close the menu window.
MENU 2
(NOTE 1)
(Note 2)
(Note 3)
(Note 1)
(Note 1)
1
2
3
4
5
6
(Note 1)
(Note 1)
7
8
9
9 Restore factory settings.
MENU