Furuno CI-35H - Manual (Page 24)

2-4
3. OPERATING PROCEDURE
SUBJECT/PURPOSE OPERATON (ACTION)
1
2
3
4
5
Power-on ¡ Press key.
13 Power-off ¡ While pressing and holding down key, press key.
Display brilliance adjustment ¡ Turn BRILLIANCE control. (CW : Bright, CCW : Dark)
Setting measuring depth
Selecting tracking mode
Reacquiring of temporarily
lost ground echo
(Manual bottom acquisition)
¡ Press and turn knob to set depth. After setting, press
any key.
¡ Tap key to select tracking mode.
GT/WT/AUTO or GT/NAV/AUTO.
*Use ground tracking mode if water depth is shallower than 200m.
*Select “T/D” or “NAV-TIDE” in MENU 4 - “WT SPEED” to switch
between WT and NAV mode.
¡ Press and hold key until “MAN” appears instead of “GT”.
(LED to the left of this key lights.)
¡ While watching echo level display, turn knob to place
acquisition cursor on the bottom echo.
¡ Press key when bottom acquisition is completed.
7 Setting ranges
¡ Speed range for tide
vector display
¡ Distance range for course
plot display
¡ Depth range for echo level
display
¡ Color gradation level for
echo level display
¡ Press key to call range menu.
¡ Set desired range by and knobs.
¡ Press key again to store the setting.
8 Setting conditions for
measurements and displays
¡ Press key.
¡ Set desired condition by / knobs and key.
¡ Press key again to store the settings.
9 Setting alarm limits
¡ Ships speed/course
¡ Tide speed/direction
¡ Tide dif. speed/direction
¡ Trip time/distance
¡ Press key to call alarm menu.
¡ Set desired alarm conditions by / knobs and key.
¡ Press key again to store the settings.
10 Plotting event mark
(Storing present position)
¡ Press key.
11 Starting and stopping tide
effect plotting
¡ Press key.
12 Switching course plot
display on and off
¡ Press key.
6 Changing presentation mode
for vector graph display
¡ Press key to alternate “Head-up” mode and “North-up”
mode.
PWR
LYR
n
TRACK
MODE
MANUAL
TRACK
MANUAL
TRACK
TIDE
EFECT
COURSE
PLOT
HU
NU
RANGE
RANGE
MENU
EVENT
EVENT
ALARM
ALARM
EVENT
PWR OFF
MENU