Furuno CI-35H - Manual (Page 53)

4-11
3. ALARM SET MENU
The ALARM menu permits selection of alarm sources and alarm parameters.
ALARM FOR TIDE/TIDE DIFFERENTIAL/SHIP’S MOVEMENT
This alarm is for alerting you to change in speed and direction of tide/tide dif./ship’s movement.
**ALARM SET** KNOB ITEM
: ON
KNOB SETUP
END : ALARM
1ST LAYER : SPD
2ND LAYER : SPD
3RD LAYER : SPD
SHALLOW T/D : SPD
DEEP T/D : SPD
SHIP SPEED
TRIP
: SPD
: DIST
knob knob
: OFF
DIR
DIR
DIR
DIR
CRS
TIME
DIR
EXEC : EVENT
(Note 1)
: Alarm range not set. (factory default)
: Alarm range (zone) is preset, but alarm function is inactive.
: Alarm function is active.
: Audible alarm is disabled. (Speaker OFF)
: Audible alarm is enabled. (Speaker ON)
(Note 1)
SHALLOW T/D : Tide difference between base layer and the shallower of the other two lay-
ers.
DEEP T/D : Tide difference between base layer and the deeper of the other two layers.
REF.
LAYER
SHALLOW T/D DEEP T/D
1
2
3
1 2
2 1
3 1
1 3
2 3
3 2