Grizzly G0588/G0591 - Manual (Page 14)

-6-
G0588/G0591 12" Sliding Table Saws
P. Riving Knife: Maintains kerf opening during
cutting operations. This function is crucial to
preventing kickback caused by the kerf clos-
ing behind the blade.
Q. Main Blade (Not Included): Performs the
cutting operations.
R. Scoring Blade (Not Included): Small cut-
ting blade that rotates opposite the main
saw blade. The blade scores the workpiece
before the actual cutting operation is per-
formed preventing tear-out in laminate mate-
rials. The scoring blade is adjustable left and
right, up and down, and in thickness of kerf.
S. Scoring Blade Vertical Adjustment Socket:
Internal cap screw adjusts the height of the
scoring blade.
T. Scoring Blade Horizontal Adjustment
Socket: Internal cap screw adjusts the hori-
zontal position of the scoring blade in relation
to the main blade.
U. Scoring Blade Lock Socket: Locks the
scoring blade adjustments.
V. Lower Blade Guard: Prevents accidental
contact with the blade when the table is at its
full extension.
Figure 2. Fence controls. Figure 3. Blades.
J. Rip Fence Body Lock Lever: Secures the
fence body in position along the fence rail.
K. Rip Fence Scale: Allows precise measure-
ment of rip cutting operations.
L. Rip Fence Lock Handle: Secures the fence
face on its forward/backward slide track.
M. Micro-Adjust Knob: Precisely adjusts the
fence.
N. Fence Face: The surface that the workpiece
slides along.
O. Fence Body: Guides the fence along the rail
and supports the fence face.
J
N
K
M P
R
L
O
Q
V
T
U
S