Grizzly G0588/G0591 - Manual (Page 47)

G0588/G0591 12" Sliding Table Saws
-39-
Figure 64. Example of miter cutting operation.
The miter fence allows miter cuts from 0˚ through
135˚. The table mounted miter scale has a resolu-
tion of 1˚.
To perform a miter cut:
1. Slide the crosscut table to the front edge of
the sliding table and lock it in place.
2. Install the fence as shown in Figure 62 for
90˚ to 135˚ cuts, or as shown in Figure 64
for 0˚ to 90˚ cuts.
Miter Cutting
4. Position the flip stop according to the length
of the workpiece you want to cut off to the left
of the blade.
5. Load the workpiece onto the table saw. The
set up should look similar to Figure 64.
6. Once all the necessary safety precautions
have been taken, perform the cutting opera-
tion.
Figure 62. Fence set-up for 90˚ to 135˚ cuts.
3. Set the fence to the desired angle using
the crosscut table angle gauge and lock the
angle with the lock knob (see
Figure 63).
Angle Gauge Lock Knob
Figure 63. Crosscut table angle gauge.