GE Monogram 164D3333P095 - Manual (Page 20)

20
Using the Probe
Wall Oven
How to set
the oven for
roasting
when using
the probe
1 Insert the probe into the meat.
2 Plug the probe into the outlet in the oven.
Make sure it’s pushed all the way in. Close
the oven door.
3 Press the PROBE pad.
4 Press the number pads to set the desired
internal food or meat temperature.
5 Press the BAKE pad.
6 Press the number pads to set the desired oven
temperature.
7 Press the START pad.
The display will flash if the probe is inserted into the
outlet and you have not set a probe temperature and
pressed the START pad.
When the oven starts to heat, the word LO will
be in the display.
After the internal temperature of the meat
reaches 100°F., the changing internal
temperature will be shown in the display.
8 When the internal temperature of the meat
reaches the number you have set, the probe
and the oven turn off and the oven control
signals. To stop the signal, press the
CLEAR/OFF
pad. Use hot pads to remove
the probe from the food. Do not use tongs to
pull on it—they might damage it.
To change the oven temperature during the
Roast cycle, press the BAKE pad and then the
number pads to set the new temperature.
• If the probe is removed from the food before
the final temperature is reached, a tone will
sound and the display will flash until the probe
is removed from the oven.
• You can use the timer even though you cannot
use timed oven operations.