Using the self-cleaning oven, Before a clean cycle, How to set the oven for cleaning – GE Monogram 164D3333P095 User Manual

Page 28

Advertising
background image

28

Using the Self-Cleaning Oven

Wall Oven

Before a
clean cycle

The oven door must be closed and all controls must be
set correctly for the cycle to work properly.

The oven must be completely cool in order to

set the self-clean cycle.
We recommend venting your kitchen with an

open window or using a ventilation fan or hood

during the first self-clean cycle.
Remove the broiler pan, broiler grid, probe, all

cookware and any aluminum foil from the oven.
The oven shelves and convection roasting rack

can be self-cleaned, but they will darken, lose

their luster and become hard to slide.
Do not use abrasives or oven cleaners. Clean the

top, sides and outside of the oven door with

soap and water.
Make sure the oven light bulb cover (on some

models) is in place and the oven light is off.

On double oven models, you can set a clean cycle in
both ovens at the same time. The last oven set will
automatically delay its start until the end of the first
oven’s clean cycle.

On double oven models, you can use timed baking in
one oven and self-clean the other at the same time.

Wipe up heavy soil on the oven bottom.

(appearance may vary)

How to set
the oven for
cleaning

1

Press the SELF CLEAN pad.

2

Using the number pads, enter the desired

clean time, if a time other than 4 hours is

needed.

Clean cycle time is normally 4 hours. You can change
the clean time to any time between 3 hours and 5
hours, depending on how dirty your oven is.

3

Press the START pad.

The door locks automatically. The display will

show the clean time remaining. It will not be

possible to open the oven door until the

temperature drops below the lock temperature

and the LOCKED DOOR light goes off.
When the LOCKED DOOR light is off, open

the door.
• The words LOCK DOOR will flash and the

oven control will signal if you set the clean

cycle and forget to close the oven door.

• To stop a clean cycle, press the CLEAR/OFF

pad. When the LOCKED DOOR light goes off

and the oven has cooled below the locking

temperature, open the door.

Advertising