GE Monogram 164D3333P095 - Manual (Page 32)

32
Care and Cleaning
Wall Oven
Probe The temperature probe may be cleaned with
soap and water or a soap-filled scouring pad.
Cool the temperature probe before cleaning.
Scour stubborn spots with a soap-filled scouring
pad, rinse and dry.
Do not immerse the temperature probe in water.
Do not store the temperature probe in the oven.
Oven light
bulb
(on some models)
NOTE: The glass cover should be removed only when
cold. Wearing latex gloves may offer a better grip.
Before replacing the bulb, disconnect electrical
power to the oven at the main fuse or circuit
breaker panel. Let the bulb cool completely
before removing it. For your safety, do not
touch a hot bulb with a damp cloth. If you do,
the bulb will break.
To remove:
Turn to remove the cover, then remove the
bulb.
To replace:
Put in a new 40-watt appliance bulb.
NOTE:
• A 40-watt appliance bulb is smaller than a
standard 40-watt household bulb.
• Install and tighten the cover.
• Reconnect electrical power to the oven.
• For improved lighting inside the oven, clean
the glass cover frequently using a wet cloth.
This should be done when the oven is
completely cool.
Bulb
Socket
Maximum
length
3 1 ⁄
2
”
Glass cover